PTFE Insulated Electrical Sleeves and Heat Shrink Tubing manufacturer in India
PTFE is made from a synthetic fluoropolymer. PTFE Sleeves are designed with excellent thermal properties. These sleeves don’t dissociate under any pressure. They also possess good mechanical strength. The PTFE Sleeving possesses high resistance to chemicals and has high dielectric properties. Apart from this, they are flame resistant and show less embrittlement. They are widely used in electrical motors, heaters, transformers, scientific instrumentation, etc. We are amongst the leading PTFE Sleeve manufacturers in India. We produce the best products, which are all available at feasible rates.
The PTFE Sleeve Joint is very flexible. These joints are very strong and possess high conductivity. The anti-stick properties of these sleeves don’t allow for the growth of funguses and sediments. The PTFE Insulated Sleeves are designed with the best materials. These insulated sleeves ensure that current from the wires doesn’t leak out or damage the equipment. Our experienced workers make use of the best raw material and the latest technology while producing the best PTFE Insulated Electrical Sleeves along with other products in the market.
The PTFE Heat Shrink Tubing is a high-temperature resistance tubing. These tubings are made with extra thin translucent tubings. This gives them protection against abrasion or other environmental stresses. The Polytetrafluoroethylene (PTFE) Heat Shrink Tubing is also used to reduce movement incurred due to friction. These tubes shrink under pressure and insulate wires and conductors. All our products including the Heat Shrinkable PTFE Sleeves, are very durable and require low levels of maintenance.
The PTFE Cable Sleeve is used in the protection of cables, hoses from extreme heat, metal splashes, and fires and flames. They are designed with good tensile strength. The PTFE Transparent Cable Sleeve has a sleeve diameter of 0.71mm and a wall thickness of 0.25mm. All our products can be easily customized by our experienced workers in different shapes and sizes as per your requirements. If you have any questions or want to know more about our products, contact us.
.
Manufacturer & Exporter of PTFE Sleeving and Polytetrafluoroethylene (PTFE) Heat Shrink Tubing
What is PTFE Sleeves
PTFE is made from a synthetic fluoropolymer. PTFE Sleeves are designed with excellent thermal properties. These Sleeves don’t dissociate under any pressure. They also possess good mechanical strength. The PTFE Sleeving possesses high resistance to chemicals and has high dielectric properties. Apart from this, they are flame resistant and show less embrittlement. They are widely used in electrical motors, heaters, transformers, scientific instrumentation, etc. We are amongst the leading PTFE Sleeves manufacturers in India. We produce the best products, which are all available at feasible rates
Specification of PTFE Sleeves Joint
| Usage/Application | electrical |
| Color | As per customer requirements |
| Length | 2Mtr. to 6Mtr. ( Subject to Size ) |
| Inner Diameter | 0.30mm to 15mm |
| Rated Voltage | 1 KV |
| Material | Polytetrafluoroethylene |
| Min Temperature | -65 deg C |
| Tensile Strength | 10.4 Mpa |
| Max Temperature | +250 deg C |
Teflon Sleeves price
Description |
PTFE Sleeves Price |
| Aging Resistant PTFE Insulated Shaft Sleeves PTFE Shaft Sleeves | Min. Order: 100 Pieces |
| High Performance PTFE Shaft Sleeves PTFE Bushings | US $ 2 / Piece |
| PTFE Fiberglass Industrial Filter Sleeves | US $ 5-40 / Piece |
| High Quality 70 Shore a EPDM 6% PTFE Sleeves |
US $ 0.001 / Piece |
| High Temperature Teflon/PTFE Heat Shrink Sleeves | US $ 6.8-8 / kg |
| Various Wall Thickness PTFE Hose PTFE Tube PTFE Sleeves | US $ 0.1-9.99 / Meter |
| PTFE Plastic Protect Sleeves for Medical Parts | US $ 0.2 / Piece |
| High Temperature PTFE Heat Shrink Sleeves | US $ 0.5-10 / Piece |
| PTFE Felt Filter Sleeves 160 X 3000 mm | US $ 40 / Piece |
Supplier & exporter of PTFE Heat Shrink Tubing and Teflon Sleeve in Mumbai as per JSS-51034, MIL-W 16878
PTFE Heat-shrinkable Sleeves 2/1
Nominal |
For covering Ø (mm) |
Wall Thicknesses (mm) |
|||
size |
maxi |
mini |
Thin |
standard |
Lightweight |
AWG 30 |
0,86 |
0,38 |
0,23 |
_ |
_ |
28 |
0,97 |
0,46 |
0,23 |
_ |
_ |
26 |
1,17 |
0,56 |
0,23 |
_ |
_ |
24 |
1,27 |
0,69 |
0,25 |
0,30 |
0,15 |
22 |
1,40 |
0,81 |
0,25 |
0,30 |
0,15 |
20 |
1,52 |
0,99 |
0,30 |
0,41 |
0,15 |
19 |
1,65 |
1,09 |
0,30 |
0,41 |
0,15 |
18 |
1,93 |
1,24 |
0,30 |
0,41 |
0,15 |
17 |
2,16 |
1,37 |
0,30 |
0,41 |
0,15 |
16 |
2,36 |
1,55 |
0,30 |
0,41 |
0,15 |
15 |
2,79 |
1,70 |
0,30 |
0,41 |
0,15 |
14 |
3,05 |
1,83 |
0,30 |
0,41 |
0,20 |
13 |
3,56 |
2,03 |
0,30 |
0,41 |
0,20 |
12 |
3,81 |
2,26 |
0,30 |
0,41 |
0,20 |
11 |
4,32 |
2,57 |
0,30 |
0,41 |
0,20 |
10 |
4,85 |
2,84 |
0,30 |
0,41 |
0,20 |
9 |
5,21 |
3,15 |
0,38 |
0,51 |
0,20 |
1/8 |
5,46 |
3,30 |
0,38 |
0,51 |
0,20 |
8 |
6,10 |
3,58 |
0,38 |
0,51 |
0,20 |
7 |
6,86 |
4,01 |
0,38 |
0,51 |
0,20 |
6 |
7,67 |
4,52 |
0,38 |
0,51 |
0,25 |
5 |
8,13 |
5,03 |
0,38 |
0,51 |
0,25 |
4 |
9,40 |
5,67 |
0,38 |
0,51 |
0,25 |
3 |
9,91 |
6,32 |
0,38 |
0,51 |
0,25 |
1/4 |
10,41 |
6,60 |
0,38 |
0,51 |
0,25 |
2 |
10,92 |
7,06 |
0,38 |
0,51 |
0,25 |
1 |
11,43 |
7,90 |
0,38 |
0,51 |
0,25 |
5/6 |
11,94 |
8,36 |
0,38 |
0,51 |
0,30 |
0 |
11,94 |
8,81 |
0,38 |
0,51 |
0,30 |
3/8 |
14,22 |
10,13 |
0,51 |
0,63 |
_ |
7/16 |
16,64 |
11,73 |
0,51 |
0,63 |
_ |
1/2 |
19,05 |
13,31 |
0,51 |
0,63 |
_ |
5/8 |
23,62 |
16,64 |
0,63 |
0,76 |
_ |
3/4 |
28,57 |
19,96 |
0,76 |
0,89 |
_ |
7/8 |
33,27 |
23,14 |
_ |
0,89 |
_ |
1 |
38,10 |
26,31 |
_ |
0,89 |
_ |
PTFE Heat-shrinkable Sleeves 4/1
Nominal |
Wall Thicknesses |
Recovered diameter (mm) |
|
size |
(mm) |
maxi |
mini |
5/64'' |
0,23 |
1,98 |
0,635 |
1/8 |
0,25 |
3,17 |
0,94 |
1/4 |
0,30 |
6,35 |
1,60 |
3/8 |
0,30 |
9,52 |
2,44 |
1/2 |
0,38 |
12,70 |
3,66 |
5/8 |
0,38 |
15,87 |
4,52 |
3/4 |
0,38 |
19,05 |
5,69 |
1 |
0,38 |
25,40 |
7,06 |
1-1/4 |
0,38 |
31,75 |
8,81 |
Advantages Over Extruded Wires
Due to the one of a kind tape wrap insulation prepare utilized in making PTFE wire, PTFE Sleeves exceptional culminate concentricity is gotten which ordinarily isn't conceivable in extruded wire. These wires contains way better stripping, superior adaptability, way better tear safe and dielectric quality than expelled wires due to tape wrap procedure handle. The wire protects with P.T.F.E affirms to MIL-W 16878 or JSS-51034 or as per customer's details.
PTFE Insulated Sleeves Applications
- As protective cover over hoses for injection moulding machines
- Hoses (with or without stainless steel wire braid) for hydraulic/pneumatic applications
- Satellites, Radars and other defence electronics equipments
- For branching leads in harness/cable assembly
- Temperature sensors, Automobiles etc.
- Insulating cover for electrical joints, Motor winding leads and Transformer winding leads
- Due to high temperature proximity widely used for heater interconnections
- As carriers for corrosive, high viscosity chemicals or fluids, also under high pressure and temperature
- As capillaries for medical application
- RF Signal transmission, antennas
- Protective cover over electrical leads in Air-conditioning sealed units
- In communications, control Instruments and professional electronics
PTFE Sleeves 24/40
| Sleeves | |
| PTFE | |
| Eliminate lubrication contamination along with frozen or leaking ground joints | |
| 24/40 | |
| 3.98cm | |
| 2.33cm | |
| 0.972 in. |
| Glass Joint Sleeves | |
| Glass joints | |
| 1.57 in. | |
| 0.05mm | |
| -75° to 260°C | |
| -103° to 500°F |
Advantages of PTFE Heat Shrink Tubing
- We are a best PTFE Sleeves Manufacturers in India.
- Inert to all chemicals even at elevated temperatures & fire proof.
- Suitable for use from (-) 65°C to (+) 200°C for silver plated & (-) 65°C to (+) 260°C for nickel plated wires and for very wide frequency and temperature range (DC to 10000 MHZ).
- Resistance to fair corona, cold flow and cut through, to ultra radiation, to fungus and mould growth.
- Lowest dielectric constant (2.1), dissipation factor (below .0003).
- Smaller in size, more flexible, lighter in weight and higher reliability.
- Non contaminating, non toxic and bio compatible with good mechanical strength.
- Excellent flex life and totally unaffected by out door exposure to unlimited period.
Fire proof Teflon Sleeving and Heat Shrinkable PTFE Sleeves exporter in India
PTFE Cable Sleeves technical data
NO. |
Item Unit |
Data |
|||
|---|---|---|---|---|---|
1 |
Special gravity |
g/cm² |
2.010~2.030 51~60 |
||
2 |
Hardness |
shore D |
|||
3 |
Tensile strength |
Mpa |
≥15 |
||
4 |
Ultimate elongation |
% |
15 |
||
5 |
Working temperature |
°C |
-180~+260 |
||
6 |
Melting point |
°C |
327 |
||
7 |
Yield strength |
Mpa |
23 |
||
8 |
Density |
kg/m³ |
2200 |
||
9 |
Coefficient of friction |
/ |
0.10 |
||
features of Teflon Heat Shrink Sleeves
- Excellent anti-stick properties prevents the build up of sediments, and fungus
- Non-Flammable
- Extremely stable at high temperatures and can be used continuously at –65°C to 250°C.
- Virtually inert to almost known chemicals, UV radiation, oils, solvents and fluxes
- Flexible
- High Conductivity
- High Dielectric strength
- Extremely hydro-phobic and sheds water almost totally
- Biocompatible
- High strength
PTFE Insulated Sleevings as per JSS -54802
| Bore | Break Down Voltage | Wall Thickness |
||
| Tolerance +(mm) | Nominal (mm) | AC (K.0 Voltage) | Tolerance +(mm) | Nominal (mm) |
| 0.010 | 0.050 | 11.05 | 0.0005 | 0.025 |
| 0.010 | 0.075 | 11.05 | 0.0005 | 0.025 |
| 0.010 | 1.000 |
14.06 | 0.0005 | 0.030 |
| 0.015 | 1.050 |
16.03 | 0.0008 | 0.040 |
| 0.015 | 2.000 |
16.03 | 0.0008 | 0.040 |
| 0.015 | 2.050 |
16.03 | 0.0008 | 0.040 |
| 0.015 | 3.000 |
16.03 | 0.0008 | 0.040 |
| 0.02 | 3.05 |
17.00 | 0.01 | 0.05 |
| 0.02 | 4.00 |
17.00 | 0.01 | 0.05 |
| 0.02 | 5.00 |
17.00 | 0.01 | 0.05 |
| 0.03 | 6.00 |
17.00 | 0.01 | 0.05 |
| 0.03 | 7.00 |
17.00 | 0.01 | 0.05 |
| 0.03 | 8.00 |
17.00 | 0.01 | 0.05 |
| 0.05 | 9.00 |
17.00 | 0.01 | 0.05 |
| 0.05 | 10.00 | 17.00 | 0.01 | 0.05 |
| 0.05 | 12.00 | 17.00 | 0.01 | 0.05 |
| 0.05 | 14.00 | 17.00 | 0.01 | 0.05 |
Teflon Sleeving Tolerance
Diameter (mm) |
Tolerance (mm) |
Length (mm) |
Tolerance (mm) |
|---|---|---|---|
φ4-φ9 |
+0.045 |
1000 |
+5.00 |
Φ10-φ18 |
+0.098 |
1000 |
+5.00 |
Φ20-φ50 |
+1.050 |
1000 |
+3.00 |
Φ55-φ150 |
+2.000 |
1000 |
+3.00 |
Diameter (mm) |
Length (mm) |
Tolerance (mm) |
Tolerance (mm) |
|---|---|---|---|
Φ4-φ15 |
120 |
+0.020 |
±2.00 |
Φ15-φ90 |
300 |
+0.020 |
±2.00 |
Φ90-φ150 |
300 |
+0.030 |
±2.00 |
Φ150-φ350 |
200 |
+0.030 |
±2.00 |
Why Choose PTFE Sleeves?
- PTFE Sleeves Meet standard: UL224, CAN/CSA C22.2 NO198.1-99
- 2:1 shrink ratio
- Highly expandable sleeving, which can go over connectors and other obstacles. This makes Bhuwal Insulation Cable the solution in a very wide range of applications.
- MDPC braided sleeving is used in Germany's automotive industry and made to its highest quality and protective standards.
- Maximum rigidity due to our lengthwise oriented braid construction allows the creation of perfectly straight or multi-curved cables free of wobbles.
- Germany's highest quality UV stabilizers protect our cable sleeving material and color at outdoor use and UV exposure.
- PTFE Sleeves, cable sleeving is 100% recyclable.
- Many cable sleeving colors are fluorescent at UV-blacklight without compromising on opacity.
- PTFE Sleeves Operating temperature: -55℃ to 125℃
- Globally unique colors. Our world’s leading color creation technology allows us to create the most beautiful, saturated, brilliant and vivid colors.
- Can be used with and without heat shrink tubing.
- Minimum fully recovery temperature:120℃
- Lead-free base materials and colors: No intoxication at inhalation while melting the sleeving.
- 100% made in India & Germany incl. all base materials, globally unique cable Sleeves.
- PTFE Sleeves Minimum shrink temperature: 84℃
- PTFE Sleeves Standard color: Black, red, green, yellow, blue, white and transparent
- These PTFE Sleeves are Halogen free, low smoke, non-toxic, Flexible, flame retardant
PTFE Transparent Cable Sleeves test method
| Properties | Test Method | Typical Data |
|---|---|---|
Elongation |
ASTM D 2671 |
≥200% |
Tensile strength |
ASTM D 2671 |
≥10.4MPa |
Elongation after aging |
158℃×168h |
≥100% |
Volume resistivity |
IEC 60093 |
≥1014Ω.cm |
Tensile strength after heat |
158℃×168h |
≥7.3MPa |
Flammability |
ASTM D 2671 C |
VW-1 |
Longitudinal change |
ASTM D 2671 |
-5%~+5% |
Heat shock |
UL 224,250℃×4h |
No track ,no drippings |
Voltage withstand (Rated voltage, 600V) |
UL 224 |
2500V,1min without breakdown |
Dielectric strength |
ASTM D 149 |
≥15kV/mm |
Teflon Heat Shrink Sleeves and PTFE Transparent Cable Sleeve supplier & exporter in Mumbai
Weight chart of Teflon Heat Shrink Sleeves
Item No.(mm) |
Length per roll (m/set) |
Flat width (mm) |
Actual Size (mm) |
Weight per meter (kg) |
|---|---|---|---|---|
φ1 |
200 |
/ |
1.05±0.02 |
0.05 |
φ2 |
200 |
/ |
2.05±0.02 |
0.07 |
φ2.05 |
200 |
/ |
3.00±0.02 |
0.085 |
Φ3 |
200 |
/ |
3.05±0.02 |
0.09 |
φ3.05 |
200 |
/ |
4.00±0.03 |
1.005 |
φ4 |
200 |
/ |
4.05±0.03 |
1.02 |
φ5 |
200 |
/ |
5.05±0.04 |
1.02 |
φ6 |
100 |
/ |
6.05±0.04 |
1.01 |
φ8 |
100 |
14 |
8.05±0.05 |
0.09 |
φ10 |
100 |
16 |
10.05±0.05 |
1.01 |
φ12 |
100 |
20 |
12.05±0.05 |
1.02 |
φ14 |
100 |
23 |
14.05±0.05 |
1.05 |
φ16 |
100 |
26 |
16.05±0.05 |
1.09 |
φ18 |
100 |
30 |
19.00±0.05 |
2 |
φ20 |
100 |
32 |
21.00±0.05 |
2.04 |
φ22 |
100 |
35 |
23.00±0.05 |
2.05 |
φ25 |
25 |
43 |
26.00±0.05 |
0.09 |
φ30 |
25 |
50 |
31.05±0.05 |
1.006 |
φ35 |
25 |
55 |
36.05±1.00 |
1.02 |
φ40 |
25 |
64 |
41.05±1.00 |
1.05 |
φ50 |
25 |
80 |
≥50 |
1.085 |
PTFE Sleeving approval list
 |
 |
 |
 |
 |
 |
 |
Standard Range of PTFE Sleeves
| Inner Diameter(D) Nominal(mm) |
0.050 | 0.075 | 1.000 | 1.050 | 2.000 | 2.050 | 3.000 |
|---|---|---|---|---|---|---|---|
| Wall Thickness(T) Nominal(mm) |
0.025 | 0.025 | 0.030 | 0.040 | 0.040 | 0.040 | 0.040 |
| Inner Diameter(D) Nominal(mm) |
3.050 | 4.000 | 5.000 | 6.000 | 7.000 | 8.000 | 9.000 |
|---|---|---|---|---|---|---|---|
| Wall Thickness(T) Nominal(mm) |
0.050 | 0.050 | 0.050 | 0.050 | 0.050 | 0.050 | 0.050 |
Polytetrafluoroethylene (PTFE) Heat Shrink Tubing packaging
- Inner packing: wooden drum, plastic drum, paper drum
- Other packing requirement according to client's request
- Packing lengths : 100ft/roll, 100m/roll, 300ft/roll
- Outer packing: carton box, pull out box
- Outer packing: wooden case, carton box
- Packing length:100 to 1,000m reeled in carton drum or according to customers' requirement
- Other packing is available as per customer demand
- The quantity in one ctn base on the type of cord and its length.
- cut to length and shipped on nonreturnable reels
wall thickness of Heat Shrinkable PTFE Sleeves
| Wall thickness | BDV (AC RMS) |
|---|---|
| 0.040mm | 16.3KV |
| 0.030mm | 14.6KV |
| 0.025mm | 11.5KV |
| 0.050mm | 17.0KV |
Our PTFE Sleeves Supplied in below industries
Electrical Industry
Tanzania, Colombia, Argentina
Medical Application
Germany, Italy, Iraq
Automobiles
Austria, Israel, Brazil
Other PTFE Insulated Sleeves importers, dealers, suppliers, distributors, stockists, exporters, and stockholders purchase Teflon Sleeves from Bhuwal Insulation and resale with good margins, so buy directly from PTFE Sleeve manufacturers in India to save money.
various types PTFE Sleeves for sale
|
|
PTFE Sleeves Manufacturers In India
Table of Content